search
No Result Found or Input is not valid.
you might be interested in
popular products
Heat & Cold Resistant Glove with Silicone Rubber Outer Shell and Nylon Lining - 12"
70G
Color:
To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.
The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.
The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.
Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).
CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.
Chemical Name |
Level |
BTT |
|---|---|---|
| n-Heptane |  | 480 MIN |
| Sodium hydroxide, 40% | | 480 MIN |
| Sulfuric acid, 96% |  | <30 MIN |
PRODUCTS 