Protect Your Arms

When using hand protection, you should also consider arm protection to extend your safety coverage to protect against other potential injuries. Whether you handle large or sharp objects, are exposed to sparks or just need to have your forearms covered, protective sleeves can produce various solutions to meet your safety needs.

SHOWING 1-22 OF 22 ITEMS
1 of 1
Smart Fit

Kut Gard®

Single-Ply PolyKor® Xrystal® / Para-Aramid Blended Sleeve with Smart-Fit® and Thumb Hole

GP1021AXTH

  • Smart Fit Xrystal/Aaramid Sleeve
  • 18" with thumbhole
  • SIZE: 18
  • PACKED: 144/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

9_5 Cal/cm2 Sleeves

Kut Gard®

AR/FR Single-Ply ACP / Kevlar® Blended Sleeve with Thumb Hole

GP10KAM20

  • ACP Technology/Dupont Kevlar 1-Ply 2x1 Rib Knit
  • Arc Rated
  • 9.5 Cal/cm2
  • Knit Wrist and Elastic Top
  • SIZES: 12-20
  • PACKED: 144/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ATPV 9.5Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

2-Ply Tube Knit BEST SELLER

Kut Gard®

2-Ply Kevlar® Sleeve

GP10KS

  • 100% Kevlar
  • Double Ply
  • 10"
  • SIZES: 10-20
  • PACKED: 144/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Tube Knit

Kut Gard®

Single-Ply Kevlar® Sleeve

GP10KSS

  • 100% Kevlar
  • Double Ply
  • EN Cut Level 4
  • 12 Length
  • SIZES: 10-18
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Kut Gard®

Single-Ply Kevlar® Sleeve with Thumb Hole

GP10KS18STO

  • 100% Kevlar
  • 1-Ply
  • 18 Length
  • SIZES: 14-18
  • PACKED: 144/Case
2-Ply Tube Knit

Kut Gard®

2-Ply Kevlar® Sleeve with Adjustable Velcro Closure and Thumb Hole

GP10KSTHV

  • 100% Kevlar
  • Double Ply
  • 18-inch Length
  • ANSI Cut Level 3
  • Thumbhole
  • Adjustable Velcro Closure on Flared Forearm
  • SIZE: 18
  • PACKED: 144/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

2-Ply Tube Knit BEST SELLER

Kut Gard®

2-Ply Kevlar® Sleeve with Thumb Hole

GP10KSTO

  • 100% Kevlar
  • Double Ply
  • EN Cut Level 4
  • 10 Length
  • SIZES: 10-18
  • PACKED: 144/Case
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply ACP / Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

GP1521KVBK

  • Smart Fit Kevlar/Pritex Sleeve
  • 24 inch
  • with thumbhole
  • SIZE: 18
  • PACKED: 144/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply ACP / Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Elastic Thumb

GP1521KVBKET

  • Smart Fit
  • 2x1 knit
  • Pritex/Kevlar ACP Poly blend sleeve
  • 18 Inch
  • With Elastic thumb strap
  • SIZE: 18
  • PACKED: 144/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

GP1521PRIBPS

  • Smart Fit
  • 2X1 knit
  • Pritex Sleeve
  • Black
  • 18 Inch
  • Textured
  • SIZES: 8-18
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Elastic Thumb

GP1521PRIBPSET

  • Smart Fit
  • 2x1 knit
  • Pritex Sleeve
  • Black
  • With elastic thumb strap
  • Textured
  • SIZE: 18
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

GP1521PRIWPS18

  • Smart Fit
  • 2X1 knit
  • Pritex Sleeve
  • White
  • Textured
  • 18 Inch
  • SIZES: 10-20
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Thumb Hole

GP1521PRIWPSTH

  • Smart Fit
  • 2x1 knit
  • Pritex Sleeve
  • White
  • With thumbhole
  • 18 Inch Textured
  • SIZE: 18
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

GP2021DACPBPTHPT

  • Smart Fit black poly/Dyneema ACP Blend sleeve
  • 1-ply
  • 18" with thumbhole and plush top elastic
  • SIZE: 18
  • PACKED: 144/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Claw Cover®

Single-Ply Dyneema® Diamond Sleeve

GP20D

  • Sleeves made with Filament Dyneema Diamond
  • 10-inch Length
  • Knit Cuff
  • SIZES: 10-20
  • PACKED: 144/Case
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Black Cane Mesh Sleeves

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

GP306795B

  • Black Cane Mesh Sleeve
  • 9-inch
  • Double Ply
  • Velcro Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-2
ANSI Abrasion Level: 2

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

White Cane Mesh Sleeves

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

GP306795W

  • White Cane Mesh Sleeves
  • 9-inch
  • Double Ply
  • Velcro Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-2
ANSI Abrasion Level: 2

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

PIP®

Single-Ply 100% Natural Cotton Sleeve with Unsewn Edges

31-C

  • Natural Cotton Sleeve
  • Single-Ply
  • Unsewn Edges
  • Launderable
  • SIZE: 18
  • PACKED: 144/Case
Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

1-Ply Machine Knit

Claw Cover®

Single-Ply HPPE / Steel Blended Sleeve with Antimicrobial Fibers

GPCS7LGYAC

  • HPPE/Steel Blend Sleeve
  • Gray
  • Antimicrobial Fibers
  • SIZE: 22"
  • PACKED: 100/Case
ansi-A9
ANSI Cut Level: A9

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-2
ANSI Abrasion Level: 2

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ATA Hide-Away FR

Kut Gard®

Single-Ply ATA® / Modacrylic Blended Sleeve

GPS10ATAFR5BKES618

  • ATA FR Technology
  • Black Multi-Width
  • Standard A5 Sleeve
  • No-Slip Band
  • ANSI 3 Flame
  • SIZE: 18
  • PACKED: 72/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

ATA KFT and Modacrylic

Kut Gard®

Single-Ply ATA® / Modacrylic Blended Sleeve with Thumb Hole

GPS10ATAFR5BKES618T

  • ATA FR Technology
  • Black Multi-Width
  • Standard A5 Sleeve
  • No-Slip Band
  • with Thumb Hole
  • ANSI 3 Flame
  • SIZE: 18
  • PACKED: 72/Case
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

ansi-abrasion-1
ANSI Abrasion Level: 1

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Single Sleeve

US Mesh®

Stainless Steel Mesh Sleeve with Adjustable Chest Strap

GPUSM3105

  • Stainless Steel Ring Mesh Sleeve Adjustable Web Shoulder Strap
  • SIZES: S-2XL
  • PACKED: 0/Case
SHOWING 1-22 OF 22 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL